PPR clamp fitting used to fix the PPR pipe components, it can ensure the stability and safety of the pipeline. The correct installation of PPR pipe clamp fitting can effectively avoid the shaking and movement of the pipeline during use, and reduce the occurrence of leakage and other problems.
Pipe clip spacing principle:
(1) Determine the spacing of pipe clips according to the diameter of the pipe. Generally speaking, for pipelines with smaller diameters (20mm to 40mm), the pipe clip spacing should not exceed 50cm; For pipelines with larger diameters (50mm to 110mm), the pipe clip spacing should not exceed 1m.
(2) On the straight section, the pipe clip spacing should be consistent to ensure the smooth and uniform load distribution of the pipeline.
(3) The number of pipe clip should be reasonably calculated according to the length and diameter of the pipeline to ensure the stability of the pipeline. In general, a pipe with a smaller diameter should have at least two pipe clip, and a pipe with a larger diameter should have at least three pipe clips.
installation method:
(1) Before the installation of the pipe, after determining the position of the pipe clip, use a cone drill to drill holes in the pipe. The size of the hole should match the inner diameter of the pipe clip to ensure that the pipe clip can be securely installed on the pipe.
(2) Insert the pipe clip into the hole to ensure that there is no gap between the pipe clip and the pipe. Tighten the pipe clamp using a screwdriver or wrench based on hole positions and installation directions.
(3) After installation, check whether the pipe clip is firm. Test the stability of the pipe clip by gently shaking the pipe by hand.
matters need attention:
(1) In the installation process, pay attention to avoid external impact and extrusion of the pipeline, so as not to affect the fixing effect of the pipe clip.
(2) The choice of pipe clip should be in line with the diameter and material of the pipe to ensure that the pipe can be strong.
(3) In the case of limited installation conditions, special pipe glue or tape can be used to fix the pipe.
PPR pipe clip spacing specification is a specification to ensure the position and number of pipe clip in PPR pipe installation. The proper installation and arrangement of the spacing of pipe clips can ensure the stability and safety of the pipeline, reduce the occurrence of leakage and other problems, and extend the service life of the pipeline.
Hot Tags: rpr clamp fitting, China rpr clamp fitting manufacturers, suppliers, factory, Brass Threaded Fitting Socket Nipple Coupling Elbow Tee, PPR Fitting, PPR Double Seated Elbow, PPR Male Thread Elbow with Seat, Iron PPR Fitting, PERT Pipe for Underfloor Heating
